Lubricating Grease for Continuous Casting Machine

Thickened by complex metal soap, SINOPEC Lubricating Grease for Continuous Casting Machine is made from deeply refined mineral oil with EP additives, rust and oxidation inhibitors through special technical process. According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBEEB0,L-XBEEB1, L-XBEEB1-2,L-XBEEB2.

Features & Benefits

    ·  Excellent water resistant, anti-rust property. Ensure equipment’s lubrication and protection under condition of exposure to water.

    ·  Outstanding EP and anti-wear properties to meet bearings’ lubrication requirement under condition of heavy load and impact load.

    ·  Good mechanical stability provide satisfactory consistency even under high speed shear

    ·  Do not contain any heavy metal and nitrite that will do harm to human’s health and pollute environment.

Technical specification

    ·  Meets the following performance specification: Q/SH303 325—2004

Application

    ·  It is suitable for lubricating the second cooling area and roller bearings in various type of continuous caster.

    ·  Application temperature range:-20ºC to 160ºC. 180ºC in short term.

Typical Properties

Items Typical Properties Test Methods
0 1 1T 2
Appearance Smooth Yellow to light brown buttery Visual
Worked Cone Penetration,0.1mm 368 324 296 279 ASTM D217
Dropping  Point,ºC 248 278 288 287 ASTM D2265
Copper Corrosion (T2 copper strip,100ºC,24h) pass JIS K 2220.5.5
EP properties

Timken OK Load, N

 

178

 

178

 

178

 

156

ASTM D2509
Corrosion Prevention (52ºC,48h), grade 1 1 1 1 ASTM D1743

Attentions

    ·  Prevent water and impurities during storage and transportation.

    ·  Do not mix with other type of grease.

    ·  Do not heat before using.