Thickened by new complex thickening agent, SINOPEC Lithium Complex Grease with Molybdenum Disulfide is made from deeply refined mineral oil with molybdenum disulfide anti-wear agent and other additives through special technical process. According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBFBB 1,L-XBFBB 2,L-XBFBB 3.
Features & Benefits
· Outstanding EP and anti-wear properties. Effectively reduce abrasion and pitting on friction pairs and extend service life.
· Excellent high temperature performance. Can be used under higher temperature.
· Outstanding mechanical stability and oxidation stability to ensure longer drain period.
· Very good anti-water and rust resistant properties and good protective ability.
· Do not contain any heavy metal, nitrite and any other chemicals that will do harm to human’s health and pollute environment.
Technical specification
· Meets the following performance specification: Q/SH303 348—2004
Application
· It is suitable for high temperature and heavy-load equipment in metallurgical industry, also can be applied other devices in printing and dyeing industry, high capacity motor, kiln car and hot oil pump.
· Application temperature range::-20ºC to 180ºC.
Typical Properties
Items | Typical Properties | Test Methods | ||
1 | 2 | 3 | ||
Worked Cone Penetration,0.1mm | 332 | 280 | 237 | ASTM D217 |
Dropping Point,ºC | 272 | 279 | 300 | ASTM D2265 |
Copper Corrosion (T2 copper strip,100ºC,24h) | pass | pass | pass | JIS K 2220.5.5 |
Leakage (104ºC,6h),g | 0.03 | 0.02 | 0.05 | ASTM D1263 |
Corrosion prevention (52ºC,48h), grade | 1 | 1 | 1 | ASTM D1743 |
EP properties
Weld Point, PD,N |
2452 |
2452 |
2452 |
ASTM D2783 |
Attentions
· Prevent water and impurities during storage and transportation.
· Do not mix with other type of grease.
· Do not heat before using.