High and Low Temperature Grease 7017-1

SINOPEC High and Low Temperature Grease 7017-1 is manufactured from a synthetic silicone fluid and a nonsoap thickener. Its consistency is between NLGI No. 1 and No. 2. According to GB/T 7631.8-90(ISO6743/9-1987), Grease 7017-1 can be classified as L-XEEEA1-2.

Features & Benefits

    ·  Outstanding performance at ultra high temperature operation

    ·  Excellent retention and resistance to high-temperature degradation

    ·  Excellent resistance to softening under severe working

    ·  Lifelong bearing service term

Specification

    ·  Grease 7017-1 meets the requirements of specification SH 0431-92 and U.S. Military specification MIL-G-25013E.

Applications

    ·  Grease 7017-1 is designed for the lubrication of low to high speeds rolling elements bearings

    ·  Suitable operation temperature ranged from –60~250ºC, 300ºC in short-term..

Typical Properties

Item 7017-1 Test Methods
Structure Gray Smooth Buttery Eye View
Dropping Point,ºC >300 GB/T3498
1/4 Penetration(60 Strokes) ,0.1mm 71 GB/T269
Corrosion Testn(T3Cu,100ºC,3h) Pass SH/T0331
Oil bleeding,%(m/m) 6.3 GB/T392
Apparent Viscosity(-50ºC,10s-1),Pa·s 542 SH/T0048

Attentions

    ·  Do not mix two different greases in one application because the greases may react chemically and deteriorate. Mixtures are, at best, a compromise between the characteristics of the two.

    ·  Keep grease from being contaminated by water and impurities during storage and transportation.