Grease 7608 for Hydraulic Brake System

SINOPEC Grease 7608 for Hydraulic Brake System is a high-performance grease which combines a synthetic base oil with a soap thickener. According to GB/T 7631.8-90(ISO6743/9-1987), Grease 7608 can be classified as follow:L-XDCEA1.

Features & Benefits

    ·  Very low oil bleeding trend

    ·  Optimum compatibility with epdm rubber

    ·  Outstanding low and high temperature performance

    ·  Exceptional protection against corrosion

    ·  Excellent retention and resistance to high-temperature degradation

    ·  Do not contain any heavy metal and nitrite that will do harm to human’s health and pollute environment.

Technical specification

    ·  Meets the following performance specification: Q/SH303 225-2004.

Application

    ·  It is particularly suited for lubricating and protective applications between rubber ring and cylinder in automotive hydraulic brake system .

    ·  Application temperature range: -40ºC to 120ºC 150ºC in short-term.

Typical Properties

Items Typical Properties Test Methods
Appearance Yellow to brown smooth buttery Visual
Dropping Point, ºC 200 ASTM D566
1/4Worked Cone Penetration, 0.1mm 80 ASTM D217
Evaporation Loss (150ºC, 1h), % 1.2 ASTM D972
Apparent Viscosity (-30ºC, 10s-1), Pa·s 988 ГОСТ7163

Attentions

    ·  Prevent water and impurities during storage and transportation.

    ·  Do not mix with other type of grease.

    ·  Do not heat before using.