Thickened by lithium and calcium 12-hydroxystearate, SINOPEC Extreme Pressure Lithium Base Grease is made from deeply refined mineral oil with extreme pressure agents, rust and oxidation inhibitors through special process. According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBCHB 00,L-XBCHB 0,L-XBCHB 1,L-XBCHB 2.
Features & Benefits
· Outstanding extreme pressure and anti-wear performance. effectively reduce abrasion and pitting between friction surface and extending service life.
· Excellent mechanical stability keeps acceptable consistency in the process of using and avoid being washed away.
· Excellent pumpability properties. No.0 and No.1 are well suitable for centralized lubricating system.
· Do not contain any heavy metal, nitrite and other chemicals that do harm to human’s health and pollute environment.
Technical specification
· Meets the following performance specification: GB7323—94
Application
· It is suitable for lubricating bearings and gears of medium load mechanical equipments, such as cold rolling mill and hot rolling mill and blast furnace accessory equipments, steel-making lifter equipment in metallurgical industry. It can also be widely used for the lubrication of equipments and heavy-duty vehicle in mine and other industry.
· Application temperature range: -20ºCto 120ºC.
Typical Properties
Items | Typical Properties | Test Method | |||
00 | 0 | 1 | 2 | ||
Worked Cone Penetration,0.1mm | 421 | 372 | 320 | 281 | ASTM D 217 |
Dropping Point,ºC | 172 | 177 | 182 | 188 | ASTM D 566 |
Oil Separation(100ºC,24h),% | — | — | 5.0 | 1.7 | FTMS 791-321.3 |
Corrosion Prevention (52ºC,48h), grade | 1 | 1 | 1 | 1 | ASTM D 1743 |
Last Non-Seizure (Four ball method)
PB value,N |
>588 |
>588 |
>588 |
>588 |
ASTM D 2596 |
EP properties
Timken OK Load,N |
>133 |
>156 |
>156 |
>156 |
ASTM D 2509 |
Attentions
· Prevent water and impurities during storage and transportation.
· Do not mix with other type of grease.
· Do not heat before using.