Aluminum Complex Base Grease EP

Thickened by new thickening agent, SINOPEC Aluminum Complex Base Grease EP is made from high viscosity mineral oil with EP and anti-wear agents, rust inhibitor through special technical process.According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBEHB0, L-XBEHB1,L-XBEHB2, L-XBEHB 2~3.

Features & Benefits

    ·  Peculiar thermal reversibility. Resume to its normal fibre structure when cooling down after being heated at high temperature.

    ·  Excellent flow character. No.1 and No.2 grease are suitable for long distance pumping.

    ·  Excellent high temperature, EP, anti-wear and water resistant properties.

    ·  Acceptable anti-rust performance. Prevent rust on lubrication pairs.

    ·  Do not contain any heavy metal and nitrite that will do harm to human’s health and pollute environment.

Technical specification

    ·  Meets the following performance specification: Q/SH303 299-2004 and SH/T0354-93(2003)

Application

    ·  It is used for high temperature and heavy-load equipments such as continuous rolling , continuous casting machine and steel tapping roller in metallurgical industry, printing and dyeing machinery, high capacity motor.

    ·  Application temperature range: -20ºCto160ºCfor No.0,No.1,No.2;-20ºCto180ºCfor No.T2.

Typical Properties

Items Typical Properties Test Methods
0 1 2 T2
Worked Cone Penetration,0.1mm 375 330 282 248 ASTM D217
Dropping  Point,ºC 238 246 256 252 ASTM D2265
Copper Corrosion (T2 copper strip,100ºC,24h) pass JIS K 2220.5.5
105 Stroke Penetration Change Rate from 60 Stroke, % 3.78 4.35 6.25 1.26 ASTM D217
EP Properties

Timken OK Load, N

178 178 178 156 ASTM D2509
Corrosion Prevention (52ºC,48h),grade 1 1 1 2 ASTM D1743

Attentions

    ·  Prevent water and impurities during storage and transportation.

    ·  Do not mix with other type of grease.

    ·  Do not heat before using.