JZ EP A Polyurea Grease | S-Energy Philippines

Thickened by polyurea base thickener, SINOPEC JZ EP A Polyurea Grease is made from deeply refined mineral oil with extreme pressure and anti-wear additives.According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBEEB 0,L- XBEEB 0-1,L- XBEEB 1,L- XBEEB 1-2,L- XBEEB 2.

Features & Benefits

· Excellent EP and anti-wear properties. Can be used at heavy load circumstance.

· Excellent high temperature performance. Suitable for high temperature applications.

· Good dielectric stability and radiation resistance property for special working condition.

· Do not contain any heavy metal and nitrite that will do harm to human’s health and pollute environment.

Technical specification

· Meets the following performance specification: Q/SH303 309—2004

Application

· It is suitable for lubrication cases of high temperature, heavy load, wide application temperature range and harmful dielectric-contamination conditions such as mould, arc-shaped roller bank and bending roller bearings in continuous-casting machine.

· Application temperature range:-20ºC to 160ºC.

Typical Properties

Items	Typical Properties					Test Methods
Items	0	T0	1	2T	2	Test Methods
Worked Cone Penetration,0.1mm	372	349	327	311	285	ASTM D217
Prolonged (10⁵ stroke) Cone Penetration,0.1mm	390	370	342	328	306	ASTM D217
Dropping Point,ºC	286	291	302	308	308	ASTM D2265
Evaporation Loss (99ºC,22h),%	0.4	0.3	0.2	0.1	0.1	ASTM D972
Oil Separation (100ºC,24h),%	3.7	3.2	3.0	2.6	2.4	FTMS 791-321.3
EP properties Timken OK Load, N	200	200	200	200	200	ASTM D2509

Attentions

· Prevent water and impurities during storage and transportation.

· Do not mix with other type of grease.

· Do not heat before using.